Pipe Cutting Machine – Run Through Each of the Available Alternatives Any Time You’re Looking at Ordering a Pipe Cutting Machine. September 6, 2017

Laser cutting machines are exceedingly fast and accurate computer-controlled cutting machines, providing an array of advantages to an array of fabricators who cut metal plate, sheet along with pipe. On many occasions, they are your best option. In other cases, and particularly with respect to cutting and fabricating pipe, plasma may be the more sensible choice. In this post, we are going to explore the advantages of laser cutting on the whole, as well as with respect to pipe. We’ll provide a response where the laser cutting process still makes plenty of sense, detail a number of its boundaries, and provide a case for purchasing wire strippers, and why it may be your better option. Armed with the information, you may make a greater-informed decision.

A laser is a way to obtain electromagnetic radiation that emits light within an almost parallel beam. The concentration of the beam is really large which it melts and vaporizes material, so that very narrow and precise cuts result. This is especially beneficial when cutting thinner gage flat plate metal and sheet. Laser pipe cutting machines are also built with computer-controlled programming that determines where and how the interface is integrated with the material. While laser pipe cutting machines often provide wonderful benefits, they have got their limitations:

Why you need to consider laser cutting machines for plate, sheet and even pipe?

Laser cutting is definitely an accurate cutting technique.

Limited chance of material deformation as a result of small heat-affected zone.

Laser cutting is definitely a fast and incredibly productive cutting process.

Laser cutting machines are computer-controlled machines with a higher level of automation, which limit the necessity for operator interface – unmanned systems.

Laser cutting accuracy and precision produce very narrow kerf, providing closer nesting of parts, resulting in minimum material waste.

Laser cutting machines cut without generating noxious fumes.

Which fabrication work makes laser cutting meeting its boundaries?

While laser cutting machines may offer a fast, versatile and accurate approach to cut pipe, flat plate and sheet, you will find limitations:

Laser cutting is usually used for thinner materials, although some machine configurations can cut pipes approximately 32 mm thickness.

Laser cutting is normally employed for cutting without bevels. Consequently, many large wire strippers either do not possess bevel cutting capabilities or the capability will not be a primary focus.

Laser cutting machines are exceedingly expensive, making your time and money sufficient so that running just one single production shift is not really nearly enough for fabricators to realize a speedy return on their investment (ROI).

Laser cutting machines are becoming a lot more common and there are far more and more job shops with laser cutting machines in almost any given manufacturing area. Consequently, the marketplace is starting to become more competitive, contributing to lower outsourcing costs, which in-turn helps make the return on any purchase investment very much more challenging to repay.

Laser cutting machine pricing is relatively high because of the following:

High costs to acquire the cable strip crimp machine.

Higher energy consumption.

Higher operating costs.

While productivity 04dexspky thinner materials may be extremely high, laser cutting becomes less effective since the material thickness increases.

Laser cutting machinery typically requires personnel using a advanced level of technical and professional capacity to perform maintenance work that is certainly typically more complicated.


Laser cutting technology is best suited when you really need extremely fast and accurate plate and sheet cutting, or maybe if you cut and fabricate thin-walled pipe material. If you want to cut pipes with larger wall thicknesses and need to make the most of a reduced priced automation solution, then plasma pipe cutting machines provide a more cost-effective alternative and solution.

Plasma pipe cutting machinery, including our TCL400 Tube Cutting Line, provides a fast, accurate and less expensive alternative than laser pipe cutting machinery. Beveling is really a primary feature while focusing. By integrating the newest advances in high-definition plasma, accuracy is a lot improved. Finally, with respect to plasma smoke, HGG plasma machine installations include a system that captures and safely eliminates noxious fumes.